PRODUCTS UF Membranes
Martin UF Membranes with SS304 Housing
Using advanced technology and material to make PS modified UF hollow fiber membrane with SS304 housing. It’s widely used for domestic and light commercial application with backwashing, rapid flusing and chemical cleaning function. The maximum feed pressure is 0.6 MPa and inlet transmembrane pressure will be less than 0.2 MPa.
MTUF-4021-ED/ MTUF-4040-ED MTUF-4021-SD/ MTUF-4040-SD
PERFORMANCE | MTUF-4021-ED | MTUF-4021-SD | MTUF-4040-ED | MTUF-4040-SD |
Dimension(mm) | Φ116×573 | Φ140×645 | Φ116×1085 | Φ140×1125 |
Inlet and Outlet Point Diameter（mm） | G3/4","G1/2" | G3/4" | G3/4","G1/2" | G3/4" |
Membrane Area（m2） | 2.5 | 2.5 | 5 | 5 |
Flux（0.1MPa,25℃） | 0.5T/H | 0.5T/H | 1T/H | 1T/H |
Port Connection | End Port | Side Port | End Port | Side Port |
Shell Material | SS304 Housing | |||
Membrane Material | PVC, PS Modified, PAN, PVDF,PES | |||
Maximum Allow Pressure（MPa） | 0.6 | |||
Transmembrane Pressure（MPa） | 0.2 | |||
Normal Operation Pressure（MPa） | 0.1-0.2 | |||
Backwash Pressure（MPa） | 0.1 | |||
PH Value | 2-10 | |||
Max Allowable Concentration of Free Chlorine(Long Term)（mg/L） | 50 | |||
Max Allowable Concentration of Free Chlorine(Short Term)（mg/L） | <300 | |||
Operation Mode | Cross-flow or Dead-end | |||
Max Operating Temperature（℃） | <40 | |||
Membrane Characteristics | Hydrophilic/Double skin | |||
MWCO（Dalton） | 50000 | |||
Fiber Internal Diameter（mm） | 1 | |||
Fiber External Diameter（mm） | 1.6 | |||
Number of Hollow-Fiber（piece） | 1500 | |||
Max Air Pressure for Integrity Test（MPa） | 0.2 | |||
